TM 9-2350-256-20-2
0191 00
Removal
1.
Remove eight clamps (11) by removing screw (12) and lockwasher (13) from each.
2.
Disconnect connector (1) from voltage regulator (14).
3.
Disconnect connector (2) from master relay (15).
Disconnect two leads (3 and 4) from slave receptacle (16) by removing screw (17) and lockwasher (18).
4.
Disconnect connector (5) from engine disconnect (19).
5.
Disconnect three connectors (6, 7, and 8) from bulkhead to main engine bracket and rear fuel tank transmitter wiring harness
6.
(20).
0191 00-3
