TM 9-2350-256-20-2
0191 00
7.
Disconnect two connectors (9 and 10) from battery (21) by pulling back rubber insulators (22) and removing bolt (23) and
nut (24).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Connect two connectors (9 and 10) to batteries (19) using bolt (23) and nut (24). Push rubber insulators (22) back on battery
terminal.
2.
Connect three connectors (6, 7, and 8) to bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (20).
3.
Connect connector (5) to engine disconnect (19).
0191 00-4
