TM 9-2350-256-20-2
0213 00
Removal
1.
Remove ground lead (1) from hull (8) by removing screw (9) and two lockwashers (10).
2.
Disconnect connectors (2 through 7) from headlight and dimmer switch wiring harness (11).
3.
Loosen adjustment nut (12) and remove headlight assembly (13).
4.
Remove headlight base assembly (14) and gasket (15) by removing three screws (16) and three lockwashers (17), seven
electrical contacts (22), electrical insert (23), bushing (24), and lead assembly (25) from base (26).
0213 00-3
