TM 9-2350-256-20-2
0225 00
Removal
1.
Remove 10 clamps (15) by removing screw (16) and lockwasher (17) from each.
2.
Disconnect connector (1) from bulkhead disconnect (18).
3.
Disconnect two connectors (2 and 3) from APU engine disconnect by removing four screws (20), four lockwashers (21),
and four nuts (22) from each.
4.
Disconnect two connectors (4 and 5) from hydraulic pressure switch (23).
0225 00-3
