TM 9-2350-256-20-2
0225 00
9.
Connect two connectors (4 and 5) to hydraulic pressure switch (23).
10. Connect two connectors (2 and 3) to APU engine disconnect (19) using four screws (20), four lockwashers (21), and four
nuts (22).
11. Connect connector (1) to bulkhead disconnect (18).
12. Install 10 clamps (15) using lockwasher (17) and screw (16) for each.
NOTE
Follow-on maintenance: Install air inlet grilles (see WP 0341 00).
END OF WORK PACKAGE
0225 00-8
