TM 9-2350-256-20-2
0226 00
Removal
1.
Disconnect two leads (1) and two leads (3) by removing two screws (4) and four lockwashers (5) from slave receptacle (6).
2.
Remove connector receptacle (7) and cap strap (8) by removing four screws (9) and four lockwashers (10).
3.
Separate cap (11) from connector receptacle (7).
4.
Remove two lead assemblies (2) by removing screw (12) and lockwasher (13).
Disassembly
1.
Disassemble lead assemblies (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble lead assemblies (see WP 0255 00 thru 0264 00, as appropriate).
Installation
Install two lead assemblies (2) using screw (12) and lockwasher (13).
1.
Install cap (11) to connector receptacle (7).
2.
Install connector receptacle (7) and cap strap (8) using four screws (9) and four lockwashers (10).
3.
Connect two leads (1) and two leads (3) to slave receptacle (6) using two screws (4) and four lockwashers (5).
4.
NOTE
Follow-on maintenance: Install engine deck (see WP 0336 00).
END OF WORK PACKAGE
0226 00-2
