TM 9-2350-256-20-2
0237 00
Removal
1.
Remove connector (1) and gasket (4) from cover (5) by removing four screws (6) and four lockwashers (7).
2.
Unscrew cap (8) disconnect connector (2) from hydraulic oil temperature transmitter (9).
3.
Disconnect connector (3) from hydraulic oil high temperature switch (10).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Connect connector (3) to hydraulic oil high temperature switch (10).
2.
Connect connector (2) to hydraulic oil temperature transmitter (9) and install cap (8).
3.
Install connector (1) and gasket (4) to cover (5) using four lockwashers (7) and four screws (6).
NOTE
Follow-on maintenance: Install oil temperature transmitter and switch housing assembly (see WP 0425
END OF WORK PACKAGE
0237 00-2