TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
OIL TEMPERATURE TRANSMITTER AND SWITCH HOUSING ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (6) (item 372, WP 0491 00)
Screws (4) (item 583, WP 0491 00)
Materials/Parts
Equipment Condition
Gasket (item 237, WP 0491 00)
Gasket (item 342, WP 0491 00)
Rear intermediate right access floor plate removed (see
Lockwashers (6) (item 638, WP 0491 00)
Removal
1.
Disconnect harness assembly (1), and remove housing assembly (2) and gasket (3) by removing six screws (4) and six
lockwashers (5). Discard gasket.
Disassembly
1.
Remove four screws (6) and four lockwashers (7).
2.
Unscrew cap (8) and remove from cover (9).
3.
Disconnect harness assembly (10), connector (wire number 664) from transmitter (11), and connector (wire number 663)
from switch (12).
4.
Unscrew and remove transmitter (11) and switch (12) from cap (8).
5.
Remove harness assembly (10) and gasket (13) from cover (9). Discard gasket.
0425 00-1
