TM 9-2350-256-20-2
0422 00
Removal
1.
Remove elbow (1) and tee (2).
2.
Remove tee (3), valve (4), and nipple (5) from tank (6).
3.
Remove four screws (7) with four lockwashers (8) and bracket (9).
4.
Remove two eyebolts (10).
5.
Remove gage rod (11).
6.
Remove four drivescrews (12) and plate (13).
Installation
1.
Install plate (13) with four drivescrews (12).
2.
Install gage rod (11) and two eyebolts (10).
3.
Install bracket (9) with four lockwashers (8) and four screws (7).
4.
Install nipple (5), valve (4), and tee (3) to tank (6).
5.
Install tee (2) with elbow (1).
NOTE
Follow-on maintenance: Install rear center floor plate (see WP 0293 00); Install rear intermediate right
floor plate (see WP 0297 00).
END OF WORK PACKAGE
0422 00-2
