TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC OIL RESERVOIR STRAINER REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (6) (item 373, WP 0491 00)
Materials/Parts
Equipment Condition
Filter (item 259, WP 0491 00)
Rear intermediate right access floor plate removed (see
Gasket (item 336, WP 0491 00)
Lockwashers (6) (item 638, WP 0491 00)
Removal
1.
Remove filler cap (1).
2.
Remove six screws (2) and six lockwashers (3).
3.
Remove filler neck (4), gasket (5), and filter (6).
4.
Discard gasket (5) and filter (6).
Installation
1.
Install filter (6), gasket (5), and filler neck (4).
2.
Install six lockwashers (3) and six screws (2).
3.
Install filler cap (1).
NOTE
Follow-on maintenance: Install rear intermediate right access floor plate (see WP 0295 00).
END OF WORK PACKAGE
0424 00-1/2 blank
