TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC SUBPLATE ID PLATE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (4) (item 637, WP 0491 00)
Materials/Parts
Nuts (4) (item 673, WP 0491 00)
Drivescrews (4) (item 501, WP 0491 00)
U-bolts (2) (item 85, WP 0491 00)
NOTE
Removal and installation procedures are the same for all plates.
Removal
1.
Remove four drivescrews (1) each from nine plates (2).
2.
Remove plate (3) by removing four nuts (4), four lockwashers (5), and two U-bolts (6).
Installation
1.
Install plate (3) with two U-bolts (6), four lockwashers (5), and four nuts (4).
2.
Install nine plates (2) with four drivescrews (1) each.
END OF WORK PACKAGE
0423 00-1/2 blank
