TM 9-2350-256-20-2
0425 00
Assembly
1.
Place harness assembly (10) and gasket (13) in cover (9).
2.
Install transmitter (11) and switch (12) on cap (8).
3.
Connect harness assembly (10), connector (wire number 664) to transmitter (11), and connector (wire number 663) to
switch (12).
4.
Screw cap (8) on cover (9).
5.
Secure harness assembly (10) and gasket (13) to cover (9) with four screws (6) and four lockwashers (7).
Installation
1.
Install harness assembly (1), housing assembly (2), and gasket (3) to tank with six screws (4) and six lockwashers (5).
NOTE
Follow-on maintenance: Install rear intermediate right access floor plate (see WP 0295 00).
END OF WORK PACKAGE
0425 00-2
