TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
SPADE RELEASE AND LUBRICATION LINE (HYDRAULIC SPADE RELEASE) REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Lockwashers (4) (item 638, WP 0491 00)
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (4) (item 808, WP 0491 00)
Removal
1.
Disconnect and remove two hoses (1) and remove coupling (2) from connector (3) end of each hose.
2.
Remove connector (3) by removing two screws (4), two lockwashers (5), and two lubrication fittings (6).
3.
Disconnect four hoses (7) and remove four couplings (8) from connector (9) end of hoses.
4.
Remove connector (9) by removing two screws (10), two lockwashers (11), and four lubrication fittings (12) in connector.
Installation
1.
Install connector (9) with two screws (10), two lockwashers (11), and four lubrication fittings (12) in connector.
2.
Install four couplings (8) to four hoses (7) and connect to connector (9) end of hoses.
3.
Install connector (3) with two screws (4), two lockwashers (5), and two lubrication fittings (6).
4.
Install two hoses (1) and coupling (2) to connector (3) end of each hose.
END OF WORK PACKAGE
0428 00-1/2 blank
