TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
VENTILATOR BLOWER ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Nuts (3) (item 769, WP 0491 00)
Materials/Parts
Screws (3) (item 401, WP 0491 00)
Lockwashers (3) (item 640, WP 0491 00)
Washers, flat (3) (item 537, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical systems to avoid electrical shock or
burns.
Removal
1.
Disconnect connector (1).
2.
Remove ventilator blower assembly (2) by removing three nuts (3), three flat washers (4), three lockwashers (5), and three
screws (6).
Installation
1.
Install ventilator blower assembly (2) using three nuts (3), three flat washers (4), three lockwashers (5), and three screws
(6).
2.
Connect connector (1).
END OF WORK PACKAGE
0250 00-1/2 blank
