TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
BILGE PUMP POWER LEAD RELAY, MOUNTING PLATE, AND CIRCUIT BREAKER REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (2) (item 593, WP 0491 00)
Screws (2) (item 599, WP 0491 00)
Materials/Parts
Lockwashers (2) (item 620, WP 0491 00)
Equipment Condition
Lockwashers (4) (item 621, WP 0491 00)
Stowage basket forward intermediate left floor plate
Lockwashers (2) (item 632, WP 0491 00)
opened (see WP 0306 00)
Screws (4) (item 372, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical systems to avoid electrical shock or
burns.
Removal
1.
Disconnect two leads (1 and 2) from circuit breaker (3) by removing two screws (4) and two lockwashers (5).
2.
Disconnect wiring harness (6) from relay (7).
3.
Remove circuit breaker (3) by removing two screws (8) and two lockwashers (9).
4.
Remove relay (7) by removing two screws (10) and two lockwashers (11).
0251 00-1
