TM 9-2350-256-20-2
0263 00
Assembly
1.
Strip cable leads (3) insulation equal to depth of solder wells of socket contacts (6).
2.
Slide nut (1) over cable leads (3).
3.
Slide grommet (4) over cable leads (3).
4.
Insert cable leads (3) into solder wells of socket contacts (6) and solder (use resin core solder only) (refer to TB SIG 222).
5.
Push insert (7) into shell (2) from rear until seated. Groove (8) in insert must be aligned with guide in shell (2) to ensure
proper fit.
6.
Push socket contacts (6) into insert (7) from rear until seated.
7.
Slide coupling nut (5) onto shell assembly (2).
8.
Push grommet (4) down cable leads (3) and over solder wells of socket contacts (6).
9.
Screw nut (1) onto shell assembly (2).
END OF WORK PACKAGE
0263 00-2
