TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
TRANSMISSION OIL FILTER MAINTENANCE
REMOVAL, SERVICE, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (24) (item 640, WP 0491 00)
Wrench, torque (item 67, WP 0490 00)
Screws (24) (item 390, WP 0491 00)
Materials/Parts
Equipment Condition
Filter elements (4) (item 129, WP 0491 00)
Engine transmission access doors opened (see WP 0340
Gaskets (2) (item 2, WP 0491 00)
NOTE
Removal and installation procedures are the same for both left- and right-side oil filter heads.
Removal
1.
Remove 12 screws (1) and 12 lockwashers (2).
CAUTION
Prying oil filter head off with screwdriver or other object could cause damage to mating surfaces.
2.
Use two screws (1) as jackscrews to remove oil filter head (3). Screw two screws into threaded holes (4) and raise oil filter
head.
3.
Remove and discard gasket (5).
4.
Remove and discard two oil filter cartridge assemblies (6).
0266 00-1
