TM 9-2350-256-20-2
0277 00
Test and Inspection
1.
Inspect hub and bearings for wear, pitting, or other damage. Replace defective parts.
Installation
1.
Install 10 bolts (26) in hub (24).
2.
Install outer hub bearing cup (25) into hub (24) using remover, replacer, and handle.
3.
Install inner hub bearing cup (23) into hub (24) using remover, replacer, and handle.
4.
Install hub seal assembly (22) on arm (20).
5.
Install inner cone bearing (21).
6.
Install hub assembly (16) onto arm (20).
7.
Install eight screws (17), eight lockwashers (18), hub assembly (16), and gasket (19).
8.
Install bushing (15), lubrication fitting (14), and pipe plug (13) into hub assembly (16).
0277 00-4
