TM 9-2350-256-20-2
0277 00
9.
Install outer cone bearing (12).
10. Install adjusting nut (11) as follows:
a.
Tighten adjusting nut while rotating hub (24) in both directions to ensure contact of all bearing surfaces.
b.
Back off adjusting nut and torque to 5070 lb-ft (6895 Nm). Then back off 1/4 turn.
11. Install ring (10) and align adjusting nut (11) pin and ring hole to lock into place.
12. Install lockplate (9) and nut (8). Torque nut to 150300 lb-ft (203407 Nm).
13. Install static grounding spring (7), bushing (6), and relief valve (5).
14. Install gasket (4), access cover (3), six lockwashers (2), and six screws (1). Torque screws to 2025 lb-ft (2734 Nm).
NOTE
Follow-on maintenance: Tighten track (refer to TM 9-2350-256-10); Install roadwheel (see WP 0274
END OF WORK PACKAGE
0277 00-5/6 blank
