TM 9-2350-256-20-2
0278 00
Installation
1.
Install oil seal (2) in roadwheel support housing (1) using replacer and handle.
WARNING
Sealer coating is toxic and gives off harmful vapors. Use in a well-ventilated area. If adhesive gets in
eyes try to keep eyes open; flush eyes with water for 15 minutes and get immediate medical attention.
WARNING
Roadwheel support housing is heavy, use care when installing housing to avoid injury.
2.
Apply sealer coating to mounting surface of roadwheel support housing (1) and vehicle hull. Install roadwheel support
housing on hull with 11 screws (3) and 11 lockwashers (4). Torque screws to 245270 lb-ft (332366 Nm).
NOTE
Follow-on maintenance: Install roadwheel arm assembly (see WP 0276 00).
END OF WORK PACKAGE
0278 00-3/4 blank
