TM 9-2350-256-20-2
0279 00
Removal
1.
Remove two self locking nuts (1), two bolts (2), two center guides (3), and two caps (4).
2.
Position track so that track link from which track shoe guides were removed is directly on support roller to be removed.
Place heavy board on top of roadwheels. Position jack on board and raise track clear of support roller.
WARNING
Bracket assembly is heavy, get assistance when removing assembly to avoid injury.
3.
Remove four screws (5), four lockwashers (6), and bracket and wheel assembly (7).
Disassembly
1.
Remove six screws (8), six lockwashers (9), access cover (10), and gasket (11).
2.
Remove lubrication fitting (12) and static grounding spring (13).
3.
Remove nut (14) and tab washer (15).
0279 00-2
