TM 9-2350-256-20-2
0279 00
7.
Install tab washer (15) and nut (14).
8.
Install lubrication fitting (12).
9.
Install static grounding spring (13), gasket (11), access cover (10), six lockwashers (9), and six screws (8).
Installation
WARNING
Bracket and wheel assembly are heavy, use care when removing assembly to avoid injury.
1.
Install bracket and wheel assembly (7), four lockwashers (6), and four screws (5). Torque screws to 350400 lb-ft (475542
Nm).
2.
Lower track and remove jack and board.
3.
Install two center guides (3), two caps (4), two bolts (2), and two self locking nuts (1).
END OF WORK PACKAGE
0279 00-6
