TM 9-2350-256-20-2
0281 00
NOTE
Left and right idler links are removed in the same manner.
Removal
WARNING
Be sure to jack up idler wheel to prevent its dropping after idler link (1) is disconnected.
1.
Jack up and block idler arm assembly (1).
2.
Remove ten self-locking nuts (2), ten washers (3), ten bolts (4), and two compensating idler wheels (5).
3.
Remove six screws (6), six lockwashers (7), access cover (8), gasket (9), spring (10), nut (11), two washers (12 and 13),
round nut (14), cone and roller (15), and hub (16).
4.
Remove eight screws (17), eight lockwashers (18), seal assembly (19), gasket (20), and cone and roller (21) from hub (16).
0281 00-2
