TM 9-2350-256-20-2
0281 00
5.
Remove inner roller cup (22) from hub (16) using remover, replacer, and handle.
6.
Remove outer roller cup (23) from hub (16) using remover, replacer, and handle.
7.
Remove spacer (24) from compensating idler arm (25).
8.
Disconnect idler link (26) from compensating idler arm (25) by removing cotter pin (27), nut (28), washer (29), and clevis
pin (30).
9.
Disconnect opposite end of idler link (26) from roadwheel arm (31) by removing cotter pin (32), nut (33), washer (34), and
clevis pin (35).
10. Remove idler link bearing (36) from idler link (26) using puller.
0281 00-3
