TM 9-2350-256-20-2
0281 00
Installation
1.
Install idler link bearing (36) in idler link (26).
2.
Connect one end of idler link (26) to roadwheel arm (31) with clevis pin (35), washer (34), nut (33), and cotter pin (32).
3.
Connect opposite end of idler link (26) to compensating idler arm (25) with clevis pin (30), washer (29), nut (28), and cotter
pin (27).
4.
Install spacer (24) to compensating idler arm (25).
5.
Install outer roller cup (23) to hub (16) using remover, replacer, and handle.
6.
Install inner roller cup (22) to hub using remover, replacer, and handle.
7.
Install, cone and roller (21), gasket (20), seal assembly (19), eight lockwashers (18), and eight screws (17) to hub (16).
8.
Install hub (16), cone and roller (15), round nut (14), two washers (12 and 13), nut (11), spring (10), gasket (9), access cover
(8), six lockwashers (7), and six screws (6). Torque screws to 2025 lb-ft (2734 Nm).
0281 00-4
