TM 9-2350-256-20-2
0313 00
Removal
1.
Raise driver's cab-top door (1) about 2 inches (in.) (51 millimeters [mm] ) to align self-locking nuts (2 and 3) on arm control
pin (4) with opening in shaft housing (5).
Remove control arm (6) by removing self-locking nut (2), arm control pin (4), washer (7), and self-locking nut (3).
2.
Remove driver's cab-top door (1) by pulling up through shaft housing (5).
3.
Remove rubber strip (8) from driver's cab-top door (1).
4.
Remove shaft housing (5) by removing five screws (9) and five lockwashers (10).
5.
0313 00-2
