TM 9-2350-256-20-2
0312 00
13. Install padding assembly (34) with eight lockwashers (33) and eight screws (32). Torque not to exceed 96 pound-inches
(lb-in.) (10.8 newton-meters [Nm] ).
14. Install seal (27) by applying adhesive and pressing seal into place.
15. Install lock ring shoe (29) with bolt (30) and pin (19). Peen ends of pin. Install two buttons (31).
16. Install setscrews (20 and 21), nut (22), block (23), adapter (24), screw (25), and pin (18) to gun support pintle (15). Peen
ends of pin. Install two buttons (26).
0312 00-9
