TM 9-2350-256-20-2
0312 00
NOTE
Remove pins (18 and 19) only if replacement is necessary.
4.
Remove from gun support pintle (15), setscrews (20 and 21), nut (22), block (23), adapter (24), screw (25), two buttons
(26), and pin (18). File or grind off beveled ends of pin to remove.
5.
Remove seal (27). Clean all dirt and adhesive from gun ring assembly (28).
6.
Remove lock ring shoe (29) by removing bolt (30), pin (19), and two buttons (31). File or grind off beveled ends of pin to
remove.
7.
Remove eight screws (32) and eight lockwashers (33). Lift out padding assembly (34).
0312 00-4
