TM 9-2350-256-20-2
0314 00
Removal
1.
Raise mechanic's cab-top door (1) about 2 in. (51 mm) to align self-locking nuts (2 and 3) on arm control pin (4) with
opening in shaft housing (5).
2.
Remove control arm (6) by removing self-locking nut (2), arm control pin (4), washer (7), and self-locking nut (3).
3.
Remove mechanic's cab-top door (1) by pulling up through shaft housing (5).
4.
Remove seal (8) from mechanic's cab-top door (1).
5.
Remove shaft housing (5) by removing five screws (9) and five lockwashers (10).
0314 00-2
