TM 9-2350-256-20-2
0315 00
8.
Remove adjusting screw (17) and self-locking nut (18) from control arm (6).
9.
Remove retaining latch (19) by removing cotter pin (20), straight pin (21), spring (22), and washer (23).
10. Remove spring (24) from shaft housing (5).
11. Remove retaining ring (25), bearing retainer (26), bearing (27), and disk (28).
Disassembly
1.
Remove retaining ring (29), two bushings (30), and packing (31) from shaft housing (5).
Assembly
1.
Install two bushings (30), retaining ring (29), and packing (31) in shaft housing (5) and lubricate (see WP 0097 00).
Installation
1.
Install disk (28), bearing (27), bearing retainer (26), and secure with retaining ring (25).
2.
Install spring (24) in shaft housing (5).
3.
Install retaining latch (19) with straight pin (21), spring (22), washer (23), and cotter pin (20).
4.
Install adjusting screw (17) and self-locking nut (18) on control arm (6).
0315 00-3
