TM 9-2350-256-20-2
0317 00
Removal
1.
Remove handle (1) by removing cotter pin (2), nut (3), washer (4), and latch (5).
2.
Remove rubber strip (6). Clean all dirt and adhesive from stowage compartment door (7).
3.
Remove stowage compartment door (7) by removing two cotter pins (8), two washers (9), and two straight pins (10).
NOTE
Step 4 applies only to right stowage compartment door.
NOTE
Remove flow regulator setting instruction plate (11) from right stowage compartment door only if
illegible.
4.
Remove flow regulator setting instruction plate (11) by removing four drivescrews (12).
Installation
1.
If removed, install flow regulator setting instruction plate (11) with four drivescrews (12).
2.
Install stowage compartment door (7) with two straight pins (10), two washers (9), and two cotter pins (8).
3.
Install rubber strip (6) by applying adhesive and pressing strip in place. Allow adhesive to dry before closing stowage
compartment door (7).
4.
Install handle (1) with latch (5), washer (4), nut (3), and cotter pin (2).
0317 00-2
