TM 9-2350-256-20-2
0318 00
5.
Remove rubber strip (12) from personnel door (11). Clean all dirt and adhesive from opening.
NOTE
Open door halfway and secure to relieve stress on torsion bar prior to removing retainer.
6.
Remove torsion bar retainer (13) by removing four screws (14), four lockwashers (15), and lubrication fitting (16).
WARNING
Ensure door is properly supported before removing door assembly (17) to prevent personal injury or
equipment damage.
7.
Remove door assembly (17) and two shims (18) by removing eight screws (19) and eight lockwashers (20).
8.
Remove control cam (21), torsion bar (22), tube (23), expansion plug (24), and two hinge leafs (25).
0318 00-2
