TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
LEFT AND RIGHT PERSONNEL DOORS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Washers, flat (V) (item 292, WP 0491 00)
Washers, flat (V) (item 307, WP 0491 00)
Materials/Parts
Washers, flat (2) (item 540, WP 0491 00)
Adhesive (item 3, WP 0489 00)
Washers, spring (2) (item 324, WP 0491 00)
Lockwashers (8) (item 638, WP 0491 00)
Lockwashers (16) (item 642, WP 0491 00)
Personnel Required
Nuts (2) (item 694, WP 0491 00)
Mechanics (2)
Pins, cotter (2) (item 525, WP 0491 00)
Screws (16) (item 417, WP 0491 00)
Equipment Condition
Screws (8) (item 463, WP 0491 00)
Strips, rubber (2) (item 46, WP 0491 00)
Door-mounted liquid container bracket removed (see WP
Washers, flat (4) (item 272, WP 0491 00)
NOTE
Removal and installation procedures are the same for both left and right personnel doors.
Removal
1.
Remove chain (1) and S-hook (2) from quick-release pin (3).
2.
Remove quick-release pin (3) from door handle latch (4).
3.
Remove door handle latch (4) by removing cotter pin (5), nut (6), and washer (7). Remove spring washer (8) and two flat
washers (9).
4.
Remove door handle (10) from personnel door (11).
0318 00-1
