TM 9-2350-256-20-2
0315 00
5.
Install cushioning pad (16) on shaft housing (5).
6.
Install assembled shaft housing (5) with five screws (14) and five lockwashers (15).
7.
Install access cover (8), gasket (9), and access cover (10) inside rigger's cab-top door (1) with six lockwashers (12) and six
screws (11).
8.
Install rubber strip (13) on rigger's cab-top door (1) with adhesive.
9.
Install rigger's cab-top door (1) into shaft housing (5).
10. Install control arm (6) with self-locking nut (2), arm control pin (4), washer (7), and self-locking nut (3).
END OF WORK PACKAGE
0315 00-4
