TM 9-2350-256-20-2
0352 00
Disassembly
1.
Remove support (13) from backrest (14) by removing wing nut (15), lockwasher (16), and screw (17).
2.
Remove seat pan (18) by removing nut (19), lockwasher (20), two nuts (21), and two lockwashers (22).
3.
Snap ends of two springs (23) out of holes in support assembly (24).
NOTE
Remove upper screw (25) first. Insert a drive pin punch in upper screw hole while removing lower screw
(25) to prevent binding.
4.
Remove retainer assembly (3) from support assembly (24) by removing four screws (25), four lockwashers (26), and two
springs (23).
NOTE
Hollow threaded rod (27) can be pulled out of retainer assembly (3) in same manner as pulled out of
adjuster assembly (28) in step 5.
5.
Use one screw (25) (removed in step 4) and pull hollow threaded rod (27) out of spacer (29). Remove spacer and two
springs (30) from adjuster assembly (28).
0352 00-3
