TM 9-2350-256-20-2
0363 00
34. Remove lubrication fitting (100), retaining ring (101), flat washer (102), and bell crank assembly (96).
Disassembly
1.
Remove lubrication fitting (103) from bearing units (27 and 28).
Cleaning
WARNING
Particles blown by compressed air can be dangerous. Be certain to direct airstream away from yourself
and other personnel in the area. Compressed air used for cleaning will not exceed 30 psi (207 kPa). Use
only with effective chip-guarding and personal protective equipment (goggles/shield and gloves).
1.
Clean rubber parts in mild soap solution. Rinse in clean water and dry with compressed air.
Inspection-Acceptance and Rejection Criteria
1.
Inspect all parts for cracks and distortions.
2.
Inspect connecting and pivot parts for excessive wear.
3.
Inspect bearings for damage.
4.
Inspect threaded parts for cross threading and nicks.
5.
Inspect rubber parts for cracks and hardening.
0363 00-7
