TM 9-2350-256-20-2
0363 00
8.
Install key (77), lever (76), lockwasher (75), and screw (74).
9.
Install lockwasher (73) and screw (72).
10. Install key (71), lever (70), lockwasher (69), and screw (68).
11. Install nut (67) and bearing (66) to rod (65).
12. Install rod (65) with lockwasher (64) and screw (63).
NOTE
Linkages must be completely installed and aligned and rubber boot must be adjusted (see WP 0364 00)
before cementing rubber boot in place.
13. Install rubber bushing (62), rubber boot (58), clamp (61), nut (60), and bearing (59).
14. Install nut (55) and bearing (54) to one end of tube (53) and nut (57) and clevis (56) to other end of tube.
15. Install tube (53), lockwasher (52), and screw (51).
16. Install six rollers (50) with six bolts (49).
0363 00-10
