TM 9-2350-256-20-2
0363 00
Repair or Replacement
1.
Straighten any rods which are bowed.
2.
Replace any badly worn clevis rod ends or pins.
3.
Repair damaged threads with thread restoring file where possible, or replace defective threaded parts
4.
Replace defective rubber parts.
Assembly
1.
Install lubrication fitting (103) to bearing units (27 and 28).
Installation
1.
Install bell crank assembly (96) with flat washer (102), retaining ring (101), and lubrication fitting (100).
2.
Install bracket assembly (95) and bell crank assembly (96) with two screws (99), two washers (98), and two nuts (97).
3.
Install nut (94) and bearing (93) to each end of rod (90).
4.
Install self-locking nut (92) and screw (91) to each end of rod (90).
5.
Install nut (89) and bearing (88) to each end of rod (87).
6.
Install rod (87) with screw (85) and self-locking nut (86).
0363 00-8
