TM 9-2350-256-20-2
0366 00
2.
Remove screw (5) and lockwasher (6).
3.
Disconnect steering rod (7) from lever (8) by removing two cotter pins (9), straight pin (10), and two washers (11).
4.
Disconnect shifting rod (12) from lever (8) by removing cotter pin (13) and straight pin (14).
5.
Remove spade release bracket (15) by removing two screws (16) and two lockwashers (17).
6.
Loosen nuts (18 and 19) and remove throttle control assembly (20) and fuel shutoff (21) from bracket (22).
7.
Remove bracket (22) by removing two screws (23), two flat washers (24), two lockwashers (25), and two nuts (26).
8.
Remove brake pedal and bracket assembly (27) by removing two screws (28), two lockwashers (29), and two nuts (30).
Disassembly
1.
Remove cotter pin (31) and straight pin (32).
2.
Pull cam rod (33) out of bracket (34) and remove cam (35), spring (36), and collar (37).
3.
Remove screw (38) and nut (39) from cam rod (33).
4.
Remove two screws (40), two lockwashers (41), and brake pedal and support assembly (42).
5.
Remove lever (43) and key (44) from shaft (45) by removing screw (46) and lockwasher (47).
6.
Remove four caps (48) by removing four screws (49) and four lockwashers (50). Remove brake pedal (4), with shaft (45),
from support (51).
7.
Remove lubrication fitting (52) from shaft (45).
8.
Remove two retaining rings (53) and two washers (54) from shaft (45).
9.
Remove two bearing assemblies (55) and key (56) from shaft (45).
0366 00-2
