TM 9-2350-256-20-2
0402 00
22. Open two dual-pull mechanisms (48) and remove four cables (4 and 35) as follows: grasp 3/16 in. (5 mm) of each end of
cable clamp (52) with pliers. Rotate ends of clamp simultaneously until cable clamp has been untwisted and cables are
released.
Installation
1.
Install two fastener assemblies (3) and two manual control levers (2) on two cables (4).
2.
Install gasket (8) and pull-release mechanism (7) with two lockwashers (10) and two nuts (9).
3.
Install two cables (4) through pull-release mechanism (7).
4.
Install two adapters (11), two swivel connectors (12), and two conduits (13).
5.
Install cover (5) with three screws (6) onto pull-release mechanism (7).
0402 00-6
