TM 9-2350-256-20-2
0408 00
4.
Install two vertical rollers (8) with two screws (10) and two bearing washers (11).
5.
Install two retainers (4) and two halfbushings (7) each with four screws (5) and four lockwashers (6).
6.
Install two guides (1) each with four screws (2) and four lockwashers (3).
7.
Run winch slowly and guide cable on drum (12). Apply load to cable from outside of vehicle to prevent loose cable wrap.
NOTE
Follow-on maintenance: Retract cable (refer to TM 9-2350-256-10).
END OF WORK PACKAGE
0408 00-3/4 blank
