TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HOIST WINCH HOSE AND CABLE ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Equipment Condition
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
U-35 winch center right floor plate opened (see WP 0289
Materials/Parts
Cable paid out (refer to TM 9-2350-256-10)
Grease, GAA (item 13, WP 0489 00)
Floor plates door opened (see WP 0287 00 thru 0308 00)
WARNING
Gloves should be worn when working with cable to prevent cuts and abrasions.
Removal
1.
Disconnect hose (1) from elbow (2), and remove two band markers (3) from hose.
2.
Remove hoses (1 and 4) from tee (5).
3.
Remove tee (5) and seal (6).
0409 00-1
