TM 9-2350-256-20-2
0415 00
Adjustment
CAUTION
Do not operate hydraulic system when any hydraulic lines are disconnected.
CAUTION
Stayline cylinder limit valve adjustment should be accomplished with hoisting boom in stowed position
to prevent damage to equipment.
1.
Loosen two screws (1) to adjust valve lever roller (2) on cam follower bracket (3).
NOTE
During adjustment, valve lever roller (2) must ride squarely and freely on upper side of cam follower
bracket (3).
NOTE
Left and right limit valve assemblies are adjusted in same manner.
2.
If necessary, loosen jamnuts (4) and adjust screws (5) to position valve lever roller (2) so that valve lever is in fully open
position with stayline crank arms in fully stowed position.
NOTE
Follow-on maintenance: Install air inlet grilles (see WP 0342 00).
END OF WORK PACKAGE
0415 00-2
