TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HOISTING BOOM, CYLINDERS, AND RELATED PARTS MAINTENANCE
REMOVAL, INSTALLATION, INSPECTION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (2) (item 30, WP 0491 00)
Screws (3) (item 145, WP 0491 00)
Materials/Parts
Screws (2) (item 721, WP 0491 00)
Screws (11) (item 800, WP 0491 00)
Clamps, loop (5) (item 713, WP 0491 00)
Spring (item 303, WP 0491 00)
Lockwashers (2) (item 12, WP 0491 00)
Washer (item 14, WP 0491 00)
Lockwashers (3) (item 638, WP 0491 00)
Washers, flat (11) (item 538, WP 0491 00)
Lockwashers (13) (item 640, WP 0491 00)
Nuts (2) (item 691, WP 0491 00)
References
Pin (item 13, WP 0491 00)
Pins, cotter (2) (item 532, WP 0491 00)
TM 9-2350-256-24P-2
WARNING
Elevating the hoisting boom when both the main engine and the APU are inoperable is a safety hazard
and may cause injury to personnel.
NOTE
The hoisting boom will only be repaired (parts removed and installed) to the extent of the replacement
of parts authorized in TM 9-2350-256-24P-2.
0414 00-1
