TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC SYSTEM OIL FILTER MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Packings, preformed (2) (item 549, WP 0491 00)
Packings, preformed (4) (item 555, WP 0491 00)
Materials/Parts
Screws (4) (item 469, WP 0491 00)
Screws (4) (item 809, WP 0491 00)
Compound, cleaning (item 9, WP 0489 00)
Filter element (item 114, WP 0491 00)
Equipment Condition
Gaskets (2) (item 115, WP 0491 00)
Lockwashers (4) (item 643, WP 0491 00)
Rear center floor plate removed (see WP 0297 00)
NOTE
It is not necessary to remove oil filter housing to service filter element assembly (1).
NOTE
Place suitable container under filter housing prior to removal to catch any hydraulic oil that drains.
Removal
1.
Remove four screws (2) and preformed packings (3).
2.
Remove four screws (4), four lockwashers (5), and two flanges (6) from filter element assembly (1).
0420 00-1
