TM 9-2350-256-20-2
0436 00
Removal
1.
Remove clamp (1) from fuel line (2) by removing nut (3), lockwasher (4), flat washer (5), and screw (6).
2.
Remove U-bolt (7) from fuel line (8) by removing two nuts (9) and two lockwashers (10).
3.
Disconnect fuel lines (2 and 8) from the APU engine fuel filter fittings (11).
NOTE
Open drain cocks (12) on bottom of each filter and drain before removal of filters.
4.
Remove APU engine fuel filters and fittings (11) by removing three screws (13) and three lockwashers (14).
5.
Remove primary fuel filter (15) and secondary fuel filter (16) by removing from each one screw (17) and one flat washer
(18).
NOTE
Remove ID plate (19) only if required.
6.
Remove ID plate (19) by removing four drivescrews (20).
0436 00-2
