TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
APU ENGINE CRANKCASE FILL-AND-LEVEL ID PLATE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Toolkit, general mechanic's (item 59, WP 0490 00)
Drivescrews (4) (item 501, WP 0491 00)
WARNING
Unless the APU access door is properly secured by a strap, the access door can swing shut and injure
personnel working on the unit, especially if the spare roadwheel is mounted in place on the hull. To
secure the door, refer to TM 9-2350-256-10. The strap is routed through the lower access door ring
handle and stowed roadwheel hub, and tied to secure the door in the open position.
Removal
1.
Remove APU engine crankcase-fill-and-level ID plate (1) by removing four drivescrews (2).
0435 00-1
