TM 9-2350-256-20-2
0436 00
Installation
CAUTION
Use of replacement filters other than those specified in TM 9-2350-256-20P will cause damage to the
APU engine.
1.
Install ID plate (19) with four drivescrews (20).
NOTE
When replacing fuel filters (15 and 16), remove plug from bottom of filter and install drain cock (12)
from old filter.
2.
Install primary fuel filter (15) and secondary fuel filter (16) each with one screw (17) and one flat washer (18).
3.
Install APU engine fuel filters and fittings (11) with three screws (13) and three lockwashers (14).
4.
Connect fuel line (2) on primary fuel filter (15) and fuel line (8) on secondary fuel filter (16).
5.
Install U-bolt (7) over fuel line (8) with two lockwashers (10) and two nuts (9).
6.
Install clamp (1) over fuel line (2) with screw (6), flat washer (5), lockwasher (4), and nut (3).
7.
Bleed fuel system after installation of fuel filters.
0436 00-3
