TM 9-2350-256-20-2
0438 00
Removal
1.
Disconnect cable connector (1) from back of APU control box (2).
2.
Remove APU control box (2) from mounting bracket (3) by removing four nuts (4), four lockwashers (5), and four screws
(6).
3.
Remove mounting bracket (3) by removing four screws (7), four lockwashers (8), and ground strap (9).
Disassembly
1.
Remove four screws (10), four lockwashers (11) and pull rear panel (12) from APU control box (2).
2.
Remove four screws (13), four washers (14), four lockwashers (15), four nuts (16), and connector (17) from rear panel (12).
3.
Disconnect four connectors (18) from two indicator lights (19).
0438 00-2
