TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
M239 LAUNCHER DISCHARGERS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Lockwashers (3) (item 640, WP 0491 00)
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (3) (item 777, WP 0491 00)
NOTE
The discharger marked "RIGHT-HAND" is mounted on the left outside of the hull and the discharger
marked "LEFT-HAND" is mounted on the right outside of the hull.
NOTE
Removal and installation of the left- and right-hand dischargers are the same.
Removal
1.
Disconnect electrical cable connector (1) from back of discharger (2).
2.
Remove discharger (2) from vehicle by removing three screws (3) and three lockwashers (4).
Installation
1.
Install discharger (2) to vehicle with three screws (3) and three lockwashers (4).
2.
Connect electrical cable connector (1) to back of discharger (2).
END OF WORK PACKAGE
0443 00-1/2 blank
